dmp h3010lk3q document number: ds 38126 rev. 1 - 2 1 of 7 www.diodes.com august 2016 ? diodes incorporated dmp h3010lk3q 175c p - channel enhancement mode mosfet product summary bv dss r ds( on ) max i d t c = + 25 c - 30 v 7.5m @ v gs = - 10 v - 50a 1 0m @ v gs = - 4.5 v - 45a description and applications this mosfet is designed to meet the stringent requirements of automotive applications . it is qualified to aec - q101, sup ported up by a ppap and is ideal for use in: ? dc - dc converters ? power m anagement f unctions ? reverse p olarity p rotection features and benefits ? rated to +175c C ideal for high ambient temperature environments ? 100% unclamped inductive switch (uis) t est in p roduction ? low o n - resistance ? fast s witching s peed ? lead - free finish; rohs c ompliant (note s 1 & 2 ) ? halogen and antimony free. green device (note 3 ) ? qualified to aec - q101 standards for high r eli ability ? ppap c apable (note 4) mechanical data ? case: to252 (dpak) ? case material: molded plastic, Dgreen molding compound. ul flammability classification rating 94v - 0 ? moisture sensitivity: level 1 per j - std - 020 ? terminal connections: see diagram ? terminals: finish C matte tin finish a nnealed over copper l eadframe. solderable per mil - std - 202, method 208 ? weight: 0. 33 grams ( a pproximate) ordering information (note 5 ) part number case packaging dmp h 3010l k3 q - 13 to252 (dpak) 2 , 5 00/tape & reel notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain < 900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. a utomotive products are aec - q101 qualified and are ppap capable. r efer to http://www.diodes.com/ product_compliance_definitions .html . 5 . for packaging details, go to our website at http://www.di odes.com/products/packages.html . marking information equivalent circuit top view pin - out top view to252 (dpak) yyww h3010l . = manufacturers marking h3010l = product type marking code yyww = date code marking yy = year (ex: 16 = 20 16 ) ww = week (01 to 53) g s d d green e3 d s g
dmp h3010lk3q document number: ds 38126 rev. 1 - 2 2 of 7 www.diodes.com august 2016 ? diodes incorporated dmp h3010lk3q maximum ratings ( @ t a = + 25c , unless otherwise specified .) characteristic symbol value units drain - source voltage v dss - 30 v gate - source voltage v gss 20 v continuous drain current (note 8 ) v gs = - 10 v steady state t c = +25c t c = + 100 c i d - 50 - 40 a continuous drain current (note 7 ) v gs = - 10 v steady state t a = +25c t a = + 100 c i d - 16 - 11 a pulsed drain curren t ( 10 s pulse, duty cycle = 1% ) i dm - 100 a maximum body diode continuous current (note 7 ) i s - 3.5 a avalanche current (note 9 ) i a s - 47 a avalanche energy (note 9 ) e a s 113 mj thermal characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol value units total power dissipation (note 6 ) p d 2.0 w thermal resistance, junction to ambient (note 6 ) s teady s tate r ? ja 73 c/w total power dissipation (note 7 ) p d 3. 9 w thermal resistance, junction to ambient (note 7 ) s teady s tate r ? ja 3 8 c/w thermal resistance, junction to case (note 8 ) r ? j c 1.0 operating and storage temperature range t j, t stg - 55 to +1 75 c electrical characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition off characteristics (note 10 ) drain - source breakdown voltage bv dss - 3 0 gs = 0v, i d = - 250 a zero gate voltage drain current i dss a ds = - 30 v, v gs = 0v gate - source leakage i gss gs = 20 v, v ds = 0v on characteristics (note 10 ) gate threshold voltage v gs( th ) - 1.1 - 1.6 - 2.1 v v ds = v gs , i d = - 250 a static drain - source on - resistance r ds(on) gs = - 10 v, i d = - 10 a gs = - 4 .5 v, i d = - 10 a diode forward voltage v sd gs = 0v, i s = - 1a dynamic characteristics (note 11 ) input capacitance c iss ds = - 15 v, v gs = 0v , f = 1.0mhz output capacitance c oss rss g ds = 0 v, v gs = 0v , f = 1mhz total gate charge ( v gs = - 4.5 v ) q g ds = - 15 v, i d = - 10 a total gate charge ( v gs = - 10 v ) q g gs gd t d( on ) d s = - 1 5 v, v g en = - 10 v, r g = 6 d = - 1a turn - on rise time t f d( off ) f rr ? ? f = - 10 a, di/dt = - 1 0 0a/s rr ? ? f = - 10 a, di/dt = - 1 0 0a/s notes: 6 . device mounted on fr - 4 pc board, with minimum recommended pad layout, single sided. 7 . device mounted on fr - 4 substrate pc board, 2oz copper, with thermal bias to bottom layer 1inch square copper plate. 8 . thermal re sistance from junction to soldering point (on the exposed drain pad). 9 . i as and e as rating are based on low frequency and duty cycles to keep t j = + 25 c . 10 . short duration pulse test used to minimize self - heating effect. 1 1 . guaranteed by design. not subject to product testing.
dmp h3010lk3q document number: ds 38126 rev. 1 - 2 3 of 7 www.diodes.com august 2016 ? diodes incorporated dmp h3010lk3q 0.0 5.0 10.0 15.0 20.0 25.0 30.0 0 0.5 1 1.5 2 2.5 3 i d , drain current (a) v ds , drain - source voltage (v) fig ure 1. typical output characteristic v gs = - 5.0v v gs = - 4.5v v gs = - 4.0v v gs =2.2v v gs =2.5v v gs = - 2.2v v gs = - 2.5v v gs = - 3.5v v gs = - 3.0v 0.002 0.004 0.006 0.008 0.01 0.012 0 1 2 3 4 5 6 7 8 9 10 r ds(on) , drain - source on - resistance ( ) i d , drain - source current (a) figure 3. typical on - resistance vs. drain current and gate voltage v gs = - 10v v gs = - 4.5v 0.004 0.005 0.006 0.007 0.008 0.009 0.01 0.011 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 r ds(on) , drain - source on - resistance ( ) i d , drain current (a) figure 5. typical on - resistance vs. drain current and temperature v gs = - 4.5v 25 85 150 125 175 - 55 0 5 10 15 20 25 30 1 1.5 2 2.5 3 3.5 4 i d , drain current (a) v gs , gate - source voltage (v) figure 2. typical transfer characteristic v ds = - 5.0v 175 150 125 - 55 25 85 0 0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045 0.05 0 5 10 15 20 r ds(on) , drain - source on - resistance ( ) v gs , gate - source voltage (v) figure 4. typical transfer characteristic i d = - 1.0a 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 - 50 - 25 0 25 50 75 100 125 150 175 r ds(on) , drain - source on - resistance (normalized) t j , junction temperature ( gs = - 4.5v, i d = - 10a v gs = - 10v, i d = - 10a
dmp h3010lk3q document number: ds 38126 rev. 1 - 2 4 of 7 www.diodes.com august 2016 ? diodes incorporated dmp h3010lk3q 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.01 - 50 - 25 0 25 50 75 100 125 150 175 r ds(on) , drain - source on - resistance ( j , junction temperature ( gs = - 4.5v, i d = - 10a v gs = - 10v, i d = - 10a 0 5 10 15 20 25 30 0 0.3 0.6 0.9 1.2 1.5 i s , source current (a) v sd , source - drain voltage (v) figure 9. diode forward voltage vs. current t a = 125 o c t a = 85 o c t a = 25 o c t a = - 55 o c v gs = 0v t a = 150 o c t a = 175 o c 0 1 2 3 4 5 6 7 8 9 10 0 30 60 90 120 150 v gs (v) qg (nc) figure 11. gate charge v ds = - 15v, i d = - 10a 0.8 1.1 1.4 1.7 2 - 50 - 25 0 25 50 75 100 125 150 175 v gs(th) , gate threshold voltage (v) t j , junction temperature ( d = - 250 a i d = - 1ma 100 1000 10000 100000 0 5 10 15 20 25 30 c t , junction capacitance (pf) v ds , drain - source voltage (v) figure 10. typical junction capacitance f = 1mhz c rss c oss c iss 1 10 100 1000 0.1 1 10 100 i d , drain current (a) v ds , drain - source voltage (v) figure 12. soa, safe operation area t j(max) = 175 t c = 25 single pulse dut on infinite heatsink v gs = - 10v r ds(on) limited p w =10ms p w =1ms p w =100ms p w =1s p w =1 s p w =100 s p w =10 s
dmp h3010lk3q document number: ds 38126 rev. 1 - 2 5 of 7 www.diodes.com august 2016 ? diodes incorporated dmp h3010lk3q 0.001 0.01 0.1 1 1e - 06 1e - 05 0.0001 0.001 0.01 0.1 1 10 r(t), transient thermal resistance t1, pulse duration time (sec) figure 13. transient thermal resistance r jc (t) = r(t) * r jc r jc = 1.0
dmp h3010lk3q document number: ds 38126 rev. 1 - 2 6 of 7 www.diodes.com august 2016 ? diodes incorporated dmp h3010lk3q package outline dimensions please see http://www.diodes.com/package - outlines.html for the latest version. to252 (dpak) to252 (dpak) dim min max typ a 2.19 2.39 2.29 a1 0.00 0.13 0.08 a2 0.97 1.17 1.07 b 0.64 0.88 0.783 b2 0.76 1.14 0.95 b3 5.21 5.46 5.33 c 0.45 0.58 0.531 d 6.00 6.20 6.10 d1 5.21 - - e - - 2.286 e 6.45 6.70 6.58 e1 4.32 - - h 9.40 10.41 9.91 l 1.40 1.78 1.59 l3 0.88 1.27 1.08 l4 0.64 1.02 0.83 a 0 10 - all dimensions in mm suggested pad layout please see http://www.diodes.com/package - outlines.html for the latest version. to252 (dpak) dimensions value (in mm) c 4.572 x 1.060 x1 5.632 y 2.600 y1 5.700 y2 10.700 b3 e l3 d l4 b2(2x) b(3x) e c a 7 1 h seating plane a1 gauge plane a 0.508 l 2.74ref d1 a2 e1 x1 x y2 y1 y c
dmp h3010lk3q document number: ds 38126 rev. 1 - 2 7 of 7 www.diodes.com august 2016 ? diodes incorporated dmp h3010lk3q important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other c hanges without further notice to this document and any product described herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. diodes incorporated do es not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customers shall indemni fy and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized applicat ion. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this doc ument is written in english but may be translated into multiple languages for reference. only the english version of this do cument is the final and determinative format released by diodes incorporated. life support diodes incorporated products are speci fically not authorized for use as critical components in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or system s which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or effectiveness. custom ers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related requirements c oncerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, cus tomers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 6 , diodes incorporated www.diodes. com
|
